Mini air compressor spray gun skin care spray gun set precautions?

Mini air compressor spray gun skin care spray gun set correct use, ensure the continuity and uniformity of the spraying process, follow the following precautions

1. Choose the right spray liquid: This spray gun is suitable for liquid products such as makeup, tattoo, hair removal, dyeing, etc. When using, please make sure that the liquid used is suitable for the spray gun. For example, some high-viscosity liquids may need to be diluted with a thinner, otherwise the spray gun may be blocked. Please choose the right type of liquid according to different applications.

2. Air flow and air pressure control: The air flow of this spray gun is 8 liters/minute and the  pressure is 25 pounds/square inch. Please adjust the air pressure and flow of the spray gun as needed to avoid too high or too low air pressure affecting the spraying effect. Too high air pressure may cause excessive spraying of the product, and too low air pressure may cause uneven coating.

3. Nozzle and container capacity selection: The spray gun is equipped with two container capacities of 20cc and 40cc. You can choose the appropriate container according to your needs. For smaller operations, such as makeup, the 20cc capacity is more suitable, while for larger areas of spraying, such as painting or spraying cakes, the 40cc capacity is more suitable.

4. Use environment: This spray gun set is suitable for indoor and well-ventilated environments. Please avoid using in environments with extremely high temperatures or high humidity to avoid overheating or damage to the device. Ensure that the use environment is dry and clean to help extend the service life of the spray gun.

5. Cleaning and maintenance:
After use, clean the spray gun and container in time. You can use warm water or special cleaning fluid to clean it. Make sure there is no residue in the nozzle and pipe to avoid clogging when you use it next time. Maintain the spray gun regularly and check whether the nozzle is worn or clogged.

6. Power requirements:
The input voltage of this spray gun is 100-240V and the output is 12V DC, which is suitable for global voltage standards. Please make sure that the power socket and voltage match to prevent damage to the device or affect use.

7. Avoid excessive pressure:
The pressure is 25psi. Avoid adjusting to the pressure when it is not necessary to avoid uneven spraying or liquid waste. Appropriate pressure helps to obtain a smoother and more uniform coating.

8. Safe operation:
During use, avoid pointing the spray gun nozzle at sensitive areas such as the face and eyes to avoid discomfort or injury. Ensure stability during operation to avoid unexpected spray splashes.